A Paired-Plug Heterogeneity Index and Capillary Pressure Sensitivity as Tools for De-Risking Underground Gas Storage and CO₂ Sequestration Design
Paper ID : 1048-UGESR
Authors
Mosayyeb Kamari, Saeid Jamshidi, Mohsen Masihi *, Hassan Mahani
Department of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran, Iran
Abstract
Storage projects rely on laboratory properties measured on a few core plugs and extended across whole intervals. This study evaluates the risk of treating matched core plugs as interchangeable and the sensitivity of centrifuge-derived capillary pressure to test duration. Carbonate and sandstone plugs from a reservoir in southwestern Iran were examined in two programs. First, a seven-stage screening cascade identified genuine sister-plug pairs, after which a normalized paired-plug heterogeneity index (HI) was used to compare geological differences with changes caused by one washing and reloading cycle. Second, matched drainage and imbibition centrifuge tests were performed for six sister pairs at 6 and 48 h per speed step. For all four verified pairs, washing-induced HI exceeded baseline sister-pair HI for effective porosity and air permeability; permeability changed by 1.99–33.98% after washing versus 0.44–2.42% between sisters. Short 6-h centrifuge steps systematically under estimated equilibrium production, especially in low RQI samples. The results show that protocol driven variability can equal or exceed spatial plug to plug variability and can translate into about 34 m of uncertainty in retainable CO₂ column height and double digit injectivity uncertainty. A heterogeneity- and quality-weighted SCAL and injection design strategy is recommended.
Keywords
reservoir heterogeneity; sister plugs; paired-plug heterogeneity index; capillary pressure; centrifuge method; underground gas storage; CO₂ sequestration; injection design
Status: Accepted