Investigation of CO₂ Storage Mechanisms as Foam in Fractured Porous Media Using a Glass Micromodel
Paper ID : 1046-UGESR
Authors
navid Behnoodi *1, nima amjadian1, Seyed Shahaboddin Ayatollahi2
1Department of Petroleum Engineering, Sharif University of Technology, Tehran, Iran
2Department of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran, Iran
Abstract
Preferential gas flow through fractures can reduce pore-space utilization and limit the effectiveness of geological CO₂ storage. This study investigates the behavior, distribution, and short-term retention of pre-generated CO₂ foam in a heterogeneous fractured glass micromodel. A 2.5 vol% foaming-agent solution with an initial bulk foam quality of 75.61% was selected, and three pore volumes of foam were injected at flow rates of 0.1, 0.5, and 1.0 mL/min. Gas-only experiments were performed under comparable conditions. Foam increased the end-of-injection CO₂ saturation from 59.65–73.78% for gas-only injection to 73.07–88.40%, corresponding to absolute increases of 13.42–14.73 percentage points. After injection of three pore volumes of CO₂-saturated water at 0.1 mL/min, retained gas saturations were 30.63, 34.63, and 38.97%, with retention efficiencies of 41.92, 43.86, and 44.07%, respectively. Pore-scale observations revealed snap-off, lamella division, capillary trapping, bubble coalescence, and Ostwald ripening. The fracture acted as a preferential flow pathway, while foam-induced flow resistance promoted redistribution toward the adjacent porous matrix. The results demonstrate the potential of CO₂ foam to improve gas distribution and short-term retention in fractured porous media while highlighting the importance of fracture–matrix interactions.
Keywords
CO₂ foam; Fractured porous media; Glass micromodel; CO₂ storage; Capillary trapping; Fracture–matrix interaction
Status: Accepted (Poster Presentation)