| Preliminary Geological and Geophysical Evaluation of Suitable Formations for CO₂ Storage Using 3D Seismic Data; A Case Study of the North Sea F3 Block |
| Paper ID : 1013-UGESR |
| Authors |
|
saeid khorramdel *, Mohmmad Ali Riahi Institute of geophysics university of Tehran |
| Abstract |
| Carbon capture and storage (CCS) is considered one of the practical approaches for reducing industrial CO₂ emissions. This study presents a preliminary evaluation of CO₂ storage potential in the F3 Block, located in the Dutch sector of the North Sea, using open-access 3D seismic and well data. An integrated seismic–petrophysical workflow was applied to delineate a reservoir-prone geobody within coarse-grained systems tracts. The estimated pore volume is approximately 7.74×10⁸ m³, with an average effective porosity of 0.31 derived from impedance-based cross-plots. Based on volumetric calculations, the theoretical CO₂ storage capacity is about 7.6 million metric tons. Although the results suggest favorable geological conditions, uncertainties related to fault behavior, heterogeneity, and limited dynamic data should be considered. The study indicates that combining seismic interpretation with basic petrophysical analysis can provide a practical first-step screening tool for CCS site assessment. This workflow can be readily adapted to other saline aquifers with similar geological settings and available seismic data for regional-scale evaluations. |
| Keywords |
| Geobody, CCS, 3D Seismic Screening, North Sea F3 Block |
| Status: Accepted (Oral Presentation) |